ACE VSP01T2S Analogue Weatherproof Phone
Part Code: VSP01T2S
Downloads
Click on the links below for information about the ACE Analogue Weatherproof Emergency Phone
The ACe VSP01T2S Analogue weatherproof phone is suitable for emergency use and in areas where the need for a tamper-resistant, waterproof unit is essential. Suggested for use in Tunnels, in underground or metro stations, on railways, motorways, bridges and for use in marine or offshore settings such as ships, and on installations such as mines, oil rigs and power plants etc.
Analogue phone with Waterproof rating IP66 dust proof.
Robust aluminium die-cast body, vandal and tamper-resistant hardware, easy installation
Full keypad with memory, 10 touch button programmable speed-dial telephone
Door cover: self-closing for convenience
Weather-resistant to IP66 standard, service temperature range from -30 degrees to +75 degrees
Magnetic reed hook-switch
Lightening protection to ITU-T recommendation K.21
Heavy duty handset with hearing aid compatible receiver, noise cancelling microphone
Handset with industrial strong armored cord
Silicon cord for waterproof and dustproof protection
Phone integrity wiring to enable system check on the unit operability (NB for PABX systems)
Optional 7 minute time out to release the line if the handset is left off the hook (must be specified at time of ordering)
Poweder coated in UV stabilized polyester finish
Housing covered with reflective labelling for night time visibility (optional)
PSTN analogue telephone
MTBF: 100000 hours
DTMF dialling
MTTR: 2 hours
Applicable for various types of SPC exchange PABX and dispatching exchange system with feeding voltage of 33-60V.
Ambient temperature -30 ~+60 degree
Relative humidity: 10% ~95%
Atmospheric Pressure 86 ~106Kpa Circumstance noise : less than 60dB(A)
Sound level of ringing: over 70dB(A)
Standard frequency: low frequency group:697. 770. 852.941 Hz, high frequency group: 1209, 1336. 1477Hz, frequency deviation: -1.5% ~+1.5%
Call transmission index: (5KM)SLR<12, RLR<-1, STMR>10, output impedance is 600 Ohm maximum distance: 7KM
Super strong function is available for dialling 12 groups of numbers stored in the memory (maximum length of each number is 16 digits)
Connection: RJ11 screw terminal pair cable (or RJ11 Socket of plug on request)
CE, FCC, CCC Approved Product
Ingress Protection: GB4208-93 IP66 FCC
EN55022: emissions
EN55024: immunity
ITU-T Recommendations K21
RoHS Certified
Available Models
VSP01T2S
ACE (analog) Weatherproof and dustproof emergency phone suitable for tunnels, underground stations and metros, railways, motorways, marine ship and offshore settings, oil rigs, mines and powerplants
